Monofluoroalkene-Isostere as a 19F NMR Label for the Peptide Backbone: Synthesis and Evaluation in Membrane-Bound PGLa and (KIGAKI)3

Solid-state ¹⁹F NMR is a powerful method to study the interactions of biologically active peptides with membranes. So far, in labelled peptides, the ¹⁹F-reporter group has always been installed on the side chain of an amino acid. Given the fact that monofluoroalkenes are non-hydrolyzable peptide bond mimics, we have synthesized a monofluoroalkene-based dipeptide isostere, Val-Ψ[(Z)-CF=CH]-Gly, and inserted it in the sequence of two well-studied antimicrobial peptides: PGLa and (KIGAKI)₃ are representatives of an α-helix and a β-sheet. The conformations and biological activities of these labeled peptides were studied to assess the suitability of monofluoroalkenes for ¹⁹F NMR structure analysis.     

Boron-Containing Lipids and Liposomes: New Conjugates of Cholesterol with Polyhedral Boron Hydrides

A series of boron-containing lipids were prepared by reactions of cyclic oxonium derivatives of polyhedron boranes and metallacarboranes (closo-dodecaborate anion, cobalt and iron bis(dicarbollides)) with amine and carboxylic acids which are derived from cholesterol. Stable liposomal formulations, on the basis of synthesized boron-containing lipids, hydrogenated soybean l -α-phosphatidylcholine and (HSPC) 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] (DSPE-PEG) as excipients, were prepared and then characterized by dynamic light scattering (DLS) that revealed the formation of particles to be smaller than 200 nm in diameter. The resulting liposomal formulations showed moderate to excellent loading and entrapment efficiency, thus justifying the design of the compounds to fit in the lipid bilayer and ensuring ease of in vivo use for future application. The liposomal formulations based on cobalt and iron bis(dicarbollide)-based lipids were found to be nontoxic against both human breast normal epithelial cells MCF-10A and human breast cancer cells MCF-7.     

pH-Dependent Slipping and Exfoliation of Layered Covalent Organic Framework

Layered/two-dimensional covalent organic frameworks (2D COF) are crystalline porous materials composed of light elements linked by strong covalent bonds. Interlayer force is one of the main factors directing the formation of a stacked layer structure, which plays a vital role in the stability, crystallinity, and porosity of layered COFs. The as-developed new way to modulate the interlayer force of imine-linked 2D TAPB-PDA-COF (TAPB = 1,3,5-tris(4-aminophenyl)benzene, PDA = terephthaldehyde) by only adjusting the pH of the solution. At alkaline and neutral pH, the pore size of the COF decreases from 34 Å due to the turbostratic effect. Under highly acidic conditions (pH 1), TAPB-PDA-COF shows a faster and stronger turbostratic effect, thus causing the 2D structure to exfoliate. This yields bulk quantities of an exfoliated few/single-layer 2D COF, which was well dispersed and displayed a clear Tyndall effect (TE). Furthermore, nanopipette-based electrochemical testing also confirms the slipping of layers with increase towards acidic pH. A model of pH-dependent layer slipping of TAPB-PDA-COF was proposed. This controllable pH-dependent change in the layer structure may open a new door for potential applications in controlled gas adsorption/desorption and drug loading/releasing.     

Journey from Small-Molecule Diyne Structures to 2D Graphdiyne: Synthetic Strategies

Graphdiyne (GDY) exhibits unique characteristics of a highly conjugated π system, evenly distributed nanopores, and a direct band gap. This has encouraged multidisciplinary research groups to investigate its application in energy conversion and storage, catalysts, electronic devices, sensing, and separation. Herein, the achievements of synthetic strategies for preparing small-molecule diyne structures (GDY substructure), 1D nanoribbons, and 2D GDY are presented. These studies may help future investigations into the basic structure-related properties of GDY and synthetic methodology for the future developments of GDY-related 2D carbon materials.     

Fe3O4@C Nanotubes Grown on Carbon Fabric as a Free-Standing Anode for High-Performance Li-Ion Batteries

Recently, Li-ion batteries (LIBs) have attracted extensive attention owing to their wide applications in portable and flexible electronic devices. Such a huge market for LIBs has caused an ever-increasing demand for excellent mechanical flexibility, outstanding cycling life, and electrodes with superior rate capability. Herein, an anode of self-supported Fe₃O₄@C nanotubes grown on carbon fabric cloth (CFC) is designed rationally and fabricated through an in situ etching and deposition route combined with an annealing process. These carbon-coated nanotube structured Fe₃O₄ arrays with large surface area and enough void space can not only moderate the volume variation during repeated Li⁺ insertion/extraction, but also facilitate Li⁺/electrons transportation and electrolyte penetration. This novel structure endows the Fe₃O₄@C nanotube arrays stable cycle performance (a large reversible capacity of 900 mA h g⁻¹ up to 100 cycles at 0.5 A g⁻¹) and outstanding rate capability (reversible capacities of 1030, 985, 908, and 755 mA h g⁻¹ at 0.15, 0.3, 0.75, and 1.5 A g⁻¹, respectively). Fe₃O₄@C nanotube arrays still achieve a capacity of 665 mA h g⁻¹ after 50 cycles at 0.1 A g⁻¹ in Fe₃O₄@C//LiCoO₂ full cells.     

英国国家科研与创新署学科交叉研究资助机制及启示

Newly established in 2018, the UK Research and Innovation (UKRI) strengthens the strategic coordination of the UK research and innovation system by bringing together seven Research Councils, Research England, and Innovate UK. Through its nine organizations, UKRI funds multidisciplinary and interdisciplinary research in a number of priority areas. It also runs the Strategic Priorities Fund to support multidisciplinary and interdisciplinary research in strategic areas identified by government policies as well as the Global Challenges Research Fund to promote challenge-led interdisciplinary research needed by developing countries. The UKRI makes significant efforts to engage stakeholders in the development, design, and implementation of multidisciplinary and interdisciplinary programs. It has also developed a range of mechanisms to improve the evaluation of multidisciplinary and interdisciplinary projects. Chinese science and innovation funding agencies could draw upon the UKRI experience from four aspects to advance interdisciplinary research in China.     

半导体纳米复合材料的制备及其光电催化CO2还原

本实验通过模拟植物光合作用,设计制备了新颖的光电联合催化池3D-ZnO/Ni BiVO4/FTO,用电化学沉积法制备了泡沫镍负载的ZnO纳米棒光电阴极和BiVO4光电阳极,以0.1 mol·L^−1 KHCO3水溶液作为电解质,1 mmol·L^−1曙红Y为光敏剂,在−0.6 V硅太阳电池的电压下光电催化还原CO2得到了乙醇、乙酸和甲醇,总产率22.5μmol·L^−1·h^−1·cm^−2。实现了将太阳能贮存为化学能并减少了空气中的CO2,加深了学生对绿色化学和植物Calvin循环机理的理解。     

The unusual tribological behavior of diamond-like carbon films under high vacuum

We fabricate F-doped and F-S-codoped diamond-like carbon (DLC) films using plasma-enhanced chemical vapor deposition system. The hardness, Raman spectra, and high-vacuum tribological behaviors indicate that the films are DLC films. The hardness is close related to the tribological properties of DLC films under high vacuum. The high hardness of DLC films would be helpful for obtaining the long lifetime under high vacuum. The lifetimes of F-S-codoped DLC films are about 120 and 140 seconds, which is attributed to the fast graphitization under high vacuum. The lifetime of F-doped DLC films is prolonged to the value of around 300 and 440 seconds, X-ray photoelectron spectroscopy analysis exhibits the existence of the “adsorption” F, and transmission electron microscopy analysis shows that the “adsorption” F could react with Fe to form layered FeF₂ nanocrystal at the initial sliding, which could be helpful for prolonging the lifetime of F-doped DLC films under high vacuum. This investigation opens a new window to overcome the disadvantage of F, S-doped DLC films under high vacuum.     

Effects of intramolecular hydrogen bonds on phosphorescence emission: A theoretical perspective

Importing intramolecular hydrogen bond in phosphorescent transition metal complexes has been considered one of the excellent approaches to improve the electroluminescence performance of organic light-emitting diodes in real applications. However, the relationships between such H-bond structure and phosphorescent properties have not been theoretically revealed yet. In this study, two types of intramolecular hydrogen bonds are introduced into the two classes of traditional materials, that is, Pt(II) and Ir(III) complexes ( 1a and 2a ) to completely elucidate their influence on the structures and properties by comparing with the original phosphors ( 1b and 2b ) using density functional theory/time-dependent density functional theory for the first time. A comprehensive analysis of the geometric structures, molecular orbitals, and luminescence properties (including phosphorescence emission wavelengths and radiative and nonradiative decay processes) has been carried out. Our theoretical model highlights that complexes 1a and 2a embedded with H-bonds significantly promote the phosphorescence emission band blue-shifted and restrict molecular deformations compared with the corresponding 1b and 2b , which can provide helpful guidance to regulate and design several aspects of highly efficient blue phosphorescent emitters.